THE MOLD SYSTEM

We incorporate state-of-the-art robotics to ensure fence mold components maintain dimensional accuracy, consistency, and structural integrity for many years.

Our proprietary urethane raw materials are stored and handled in a temperature and humidity controlled environment to ensure quality and long-lasting durability as the forms resist the harsh effects of abrasive, wet and cured concrete.

The molds are made in the USA. The molds are not made of removable liners that must be replaced or glued.

Each FENCE MOLD SYSTEM SET includes:

One panel mold that produces twelve panels per day. Each panel is one foot (.30 meters) high x five feet (1.5 meters) long and, Two to ten feet (3.04 meters) long line post molds and

Two panel cap molds.

Each set produces ten linear feet (3.04 meters) of about six feet (1.8) in height per day.

As an example, to produce about fifty feet (15.24 m) of about 1.8 m (6 feet) high per day, you would need five sets of molds.

Corner, End, and "T" posts are available at additional cost.

We can supply an external electric or external vibrator that connects / disconnects and moves from each panel mold to the next after the mold has been filled.

Each set of molds requires 1 cubic yard (.76 cubic meters) of concrete per pour. A 6-bag pea and gravel concrete mix is ​​typical, but can be adjusted as local materials vary.

Orders are ready in 4-6 weeks, which is subject to change before an order is accepted. Subject to change at the time of order.

We offer affordable financing with a minimum down payment for clients based in the United States and only with approved credit. Not all individuals or businesses will qualify.

Smooth concrete, cobblestone look, vertical wood, stucco, and custom molds are available by special order.